BS ISO BRITISH STANDARD 1984-2:2001 Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy correct Version Part 2: Machines with verticalspindle Londor of University Licensed ICS 25.080.20 BSI NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS IS0 1984-2:2001 National foreword This British Standard reproduces verbatim ISO 1984-2:2001 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee MTE/1, Machine tools, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; S of 14 Jan 2023. monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Version correct as Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled International Standards Correspondence Index", or by using the "Find" facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of Royal Holloway University of London. a contract.Users of British Standards areresponsiblefor their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. This British Standard, having beenpreparedunderthe direction of the Engineering Summary of pages Sector Committee, was This document comprises a front cover, an inside front cover, the ISO title page, published under the authority pages ii to iv, pages 1 to 17and a back cover. oftheStandardsCommittee andcomesintoeffecton The BSI copyright date displayed in this document indicates when the 15August2001 document was last issued. Amendments issued since publication Amd. No. Date Comments CBSI08-2001 ISBN 0 580 37645 1 ISO INTERNATIONAL STANDARD 1984-2 First edition 2001-06-01 Version correct as of 14 Jan 2023. Test conditions for manually controlled milling machines with table of fixed height -Testing of the accuracy - Part 2: Machines with vertical spindle Conditions d'essai des machines a fraiser a table de hauteur fixe a commandemanuelle-Controle de la preécision- Partie 2: Machines a broche verticale Reference number ISO 1984-2:2001(E) ISO