BS ISO BRITISHSTANDARDAEROSPACESERIES 9757:2000 Fork-ends, in corrosion-resistant steel. threaded, for aircraft control wire rope turnbarrels D Dimensions and loads ICS 49.035 BSI NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAW BS IS0 9757:2000 National foreword This British Standard reproduces verbatim IS0 9757:2000 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee ACE/14, Aerospace details and parts, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in theUK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implementinternational publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled aInternational Standards Correspondence Index°, or by using the aFind° facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages i and ii, a blank page, pages 1 to 5 and a back cover. The BSI copyright notice displayed in this document indicates when the document was lastissued. This British Standard, having been prepared underthe direction ofthe Engineering Sector Committee, was published undertheauthority ofthe Amendments issued since publication Standards Committeeand comes into effect on Amd. No. Date Comments 15March2001 @BSI03-2001 ISBN 0 580 35037 1 ISO INTERNATIONAL STANDARD 9757 First edition 2000-12-15 Aerospace Fork-ends, in steel, threaded, for aircraft control wire rope turnbarrels - Dimensions and loads Aéronautique et espace-Embouts a chape, filetes, en acier, pour tendeurs de cables de commande d'aéronefs Dimensions et charges A Reference number ISO 9757:2000(E)