ISO INTERNATIONAL STANDARD 22810 First edition 2010-08-01 Horology Water-resistant watches Horlogerie-Montres étanches Reference number ISO 22810:2010(E) @ ISO 2010 Provided by IHS se from IHS Not for Resale ISO 22810:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by IsO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below COPYRIGHT PROTECTED DOCUMENT @ ISO2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, isO's memberbody in the country of the requester. ISO copyright office Case postale 56 . CH-1211 Geneva 20 Tel. + 41 22 749 01 11 Fax + 41 22 749 09 47 E-mail [email protected] Web www.iso.org Published in Switzerland ii @ ISO 2010 - All rights reserved Provided by IHS permitted without license from IHS Not for Resale ISO 22810:2010(E) Contents Page Foreword iv Introductior 1 Scope 2 Terms and definitions 3 Requirements. 3.1 General 3.2 Water resistance to overpressure 3.3 Water resistance at shallow depth .... 3.4 3.5 Water resistance on exposure to thermal shocks .... 4 Test methods 4.1 Test conditions 4.2 Condensation test... 4.3 Water resistance tests by immersion.. 4.4 Water resistance test by air overpressure. 5 Marking.. Annex A (informative) Precautions in use and notions of physics . Bibliography... Iso 2010-All rights reserved ii Provided by IHS Not for Re