8269 International Standard (TSO INTERNATIONAL ORGANIZATION FOR STANDARDIZATION MEXAYHAPOAHAA OPrAHW3ALMA HIO CTAHAAPTM3ALWM·ORGANISATION INTE RNATIONALE DE NORMALISATION Doorsets - Static loading test Blocs-portes - Essai de charge statique First edition - 1985-07-01 UDC 69.028.1 : 620.173 Ref. No. ISO 8269-1985 (E) 9861-6 Descriptors : doors, door frames, tests, static tests, static loads. Not for Resale Price based on 6 pages Foreword ISo (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through 1SO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work Draft international Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISo Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 8269 was prepared by Technical Committee ISO/TC 162, Doors and windows. International Organization for Standardization, 1985 C Printed in Switzerland etworking permitted without license from IHS Not for Resale INTERNATIONAL STANDARD ISO 8269-1985 (E) Doorsets - Static loading test Scope and field of application 5.2 1 Jacks. This International Standard specifies a method of testing the Rigid rectangular steel plates, of length 100 mm and 5.3 behaviour of doorsets under static loading. width "d" at least equal to the thickness of the door leaf. See figure 1. It applies to doorsets with one pivoting leaf, without fixed parts quirements against static loading apply, for example re- quirements relating to burgiar resistance. 00 mm 2 Reference Iso 1804, Doors - Terminology. Figure 1 -- Steel plate 3Definitions 5.4 Rigid steel shackle, used as a bridge over the lock or bolt. See figure 2. For the purposes of this International Standard, the definitions given in is0 1804 apply. 5.5 Several displacement gauges. 4 Principle 5.6Two timers, to time the test and also to time the dura- tion of any interruptions due to technical incidents. Application, by means of a steel plate or shackle, of perpen- dicular and parallel compressive forces on the face of the door 6 Procedure leaf in the opening direction, or on the door frame, in order to unbolt the door or to obtain a possibility of passage. 6.1 Secure the door frame firmly to the test rig by means of an adjustable fixing device with a block if necessary. The Apparatus rigidity of fixing to the door frame shall be sufficient to ensure that the results are not affected by it. The apparatus comprises the following. 6.2 Apply compressive forces as follows: 5.1 Adjustable test rig, in which doorsets of various sizes can be mounted in a manner similar to their instaliation in prac a) Force F, at the edge of the door leaf in the position, or positions, which seem to be the weakest, using the rec- tice; the rig shall be sufficiently rigid to ensure that any defor- mations that occur in the rig during testing wilt have a negligible tangular plate (5.3) or shackle (5.4) when the plate is not convenient (parallel or perpendicular force). See figure 3. effect on the test result. Dimensions in millimetres 50 350to500 50 Figure 2 - Steel shackle Copyright International Organization for Standardization Not for Resale